procreate
ProCreate

ProCreate is a new generation of epoxy putty formulated specifically for the professional artist to create original miniature sculpture. ProCreate has a fine, non-grainy consistency that makes it easy to mix, sculpt, smooth and allows for extremely fine detail.

• ProCreate putty is softer so it is much easier to mix and blend in when adding to a cured surface.
• Holds detail throughout the cure - no more spending 20 minutes trying to keep an edge sharp till it cures.
• Very easy to push around and smooth.
• Neutral color allows for a better detail contrast and helps with spotting mistakes.
• Files and grinds very smooth with no rough edges so corrections are easier to do.
• Excellent self adhesion.
• Adheres to metal after cure, but does not stick to tools during cure.
!
Procreate
+Shipping

ProCreate Putty

Professional Sculptors Putty. Available in 70g blister packs.

Highly recommended for sculpting of master miniatures & custom jewellery. Formulated to achieve consistent, stunning professional results every time.

PCSP1
+Shipping

ProCreate Stick Putty

STICK Putty is a pre-measured, ready to mix, 2 part epoxy putty. In only minutes it forms a tenacious bond to steel, pewter, iron and many other surfaces (does not adhere to polyethylene or polypropylene). Use to customize figures, repair terrain, build up armature and understructure. Net.Wt = 45 grams

Professional Sculptors Putty

Customizable formula – Work life, hardness and color may all be adjusted to achieve different effects as shown in the Mixing Chart below.

 % Resin (white)  % Resin (black)
 24 hr Hardness,
Shore D (+/- 2)
 Work Life,
Mins. (75F/23C)

 Commments

 40  60  55  180 Softer and more flexible, good for organic shapes. Color: dark gray
 50  50  65  120 Harder and more rigid. Color: medium gray
 60  40  75  90 Very hard and rigid. Good for machines and hard edges. Color: light gray
Note: All figures are approximate since cure can change depending on the ambient temperature and amount of putty mixed (See “Additional Curing Information” section).

To Use:
1. Cut - desired amount of each part.
2. Mix - two parts together with fingers until a uniform gray color is achieved
3. Apply - to surface and sculpt. See chart for projected working time.
 
Features and Benefits:
• Mixed Color: Gray
• No shrinkage
• Very easy to smooth
• Easy tooling and less sticky
• Holds Extremely Fine Detail
• Customizable Formula
 
Manipulating Cure Time:
• Place the mixed ProCreate™ in the freezer to stop hardening.
• Place the mixed ProCreate™ under a warm lamp (95˚ F / 35˚ C max – oven recommended) to speed the hardening process.
 
Additional Curing Information:
• Thin sections will cure more slowly
• Thicker sections will cure faster
• Heat will cure the epoxy faster
• Cold will cause the epoxy to cure more slowly

Material Safety Data Sheets are available for download here: Resin (White); Hardener (Black)

Text courtesy of Kraftmark Company.